Dynacord Digital LS-Management-System "Dynacord DSP 600"

Dynacord Digital LS-Management-System "Dynacord DSP 600"

Technische Daten:

Mains Voltage: 100 to 240V AC, 50 to 60Hz
Power Consumption: 25W
Analog Audio Inputs: 2x XLR IN, electronically balanced, 2x XLR THRU OUT, electronically balanced
Digital Audio Inputs: 1x XLR AES/EBU IN, 1x XLR AES/EBU THRU OUT
Digital Audio Format: AES3, 32 kHz to 192 kHz sample rate
Nominal Input Voltage: 1.55 V / +6 dBu
Maximum Input Voltage (with -6dB PAD engaged): 17.3 V / +27 dBu
Input Impedance: 10kOhm
Common Mode Rejection: -85 dB @ 1 kHz (typical)
A/D Conversion: 24-Bit Sigma-Delta
Analog Audio Outputs: 6x XLR OUT, electronically balanced
Nominal Output Voltage: 1.55V / +6 dBu
Maximum Output Voltage: 8.7V / +21 dBu
Output Impedance: 50Ohm
D/A Conversion: 24-Bit Sigma-Delta
Frequency Response: 20Hz to 22kHz (+/-0.5 dB)
THD+N: < 0.002 % (band limited 22Hz to 22kHz)
Dynamic Range: 116 dB (A-weighted)
USB: USB Type B on front panel (PC Interface)
Ethernet: 2x RJ-45 ports, 100MB, Integrated Switch
Control Port: 1x 6-pole Euro block Software Configurable for Preset Recall
Sample Rate: 48kHz
Data Format: 24-Bit
Internal Processing: 48-Bit Double Precision
Signal Processing: Parametric EQs, 31 band Graphic EQs, Delays, Routing, X-Over, 512 Taps FIR filters, PA limiter, Thermal protection, Level, Polarity, Signal generator
Operating Temperature Range: 0°C to 40°C
Maße (BxHxT): 483x356.1x43.6mm
Gewicht: 4.8kg

inkl. Kaltgeräte-Kabel


Abholung ab Lager in 85131 Preith.
Versand auf Wunsch zzgl. Versandkosten.